Change a Propane Tank
Forklifts powered by propane are common in warehouse settings. These forklifts have a propane mount situated at the back of the driver. These tanks need to be replaced periodically because they have limited lifespans. Forklift drivers should use care when handling propane tanks. Compressed gases are dangerous, especially since the gas is flammable. Utilize care when removing and replacing propane tank to prevent injury.
1 If there is a need to replace the propane tank, the first step is to stop the forklift, then turn the tank valve off. The forklift must be left on until the engine dies. This process burns the gas off inside the transfer hose that connects the engine and the tank. Before taking the next steps, put on the correct safety equipment, like for example insulated gloves made of either leather or neoprene. It is vital for you to protect your skin from contact with the compressed gas, which is extremely cold.
2 The hose of the tank has to be disconnected, followed by removing the tank from its holding straps. When putting in a new tank, tighten the nut to reconnect the holding straps and to reconnect the hose at the valve of the tank.
3 Leaks could be inspected simply by applying soapy water to the valve and opening it slightly. If there is a leak, it would cause bubbles to froth from around the valve. If this occurs, inspect the connection hose at the nut and the valve area. The connecting nut should be re-tightened if you detect any leaks in the valve area, and after that do the leak inspection process all over again. Persistent leaks mean that the nut and connecting hose must be replaced. Nonetheless, if replacing the hose and nut still does not stop the leak, the tank would need to be replaced.
4 Lastly, open the valve all the way to enable the gas to fill the connecting hose. After that you could start the lift truck and continue working.